120 m3/h FIXED CONCRETE BATCHING PLANT SPECIALITY |
INDEX | | | 1. AGGREGATE BUNKER 2. AGGREGATE FEEDING BELT 3. ABOVE UNIT CONSTRUCTION 4. CEMENT MIXER 5. CEMENT SILO 6. CEMENT SPIRAL 7. COMPRESSOR 8. HYDROPHORE 9. CONTROL CABIN 10. AUTOMATION SYSTEM |
|
1.AGGREGATE BUNKER |
A) Aggregate Bunker
Volume: Number of aggregate parts: Discharge Valves: Pneumatic Piston: Conditioner: Sand Vibrations : Bunker upper grid : | 160 m3 4x40 m3 4 Units / 2 Part 8 unit,(FMS) 1 unit 2 unit (Oztekfen) 4 unit |
|
B) Weighting Belt
Load Cell: Dimensions: Bearings: Weighing Bunker vibrators: Motor: Drums: Conveyor Belt: Belt Saffety : | 4x5000kg, (ESİT) 1000x12500 mm SNH series with lubrication greaser 1 unit (Oztekfen) 18,5 Kw, 1500 d/dk, ELSAN Ring-Feders and Driving drum covered with 10 mm rubber BANTSAN 4 unit direction roller |
|
2. AGGREGATE FEEDING BELT |
Dimensions: Conveyor Belt: Bearings: Motor: Drums: Walk Way: | 1000x32000mm BANTSAN SNH series with lubrication greaser 30 Kw, 1500 d/dk, ELSAN Ring-Feders and Driving drum covered with 10 mm rubber Single ended |
3. ABOVE UNIT CONSTRUCTION |
Aggregate waiting Bunker Capacity Valve | 3 M3 Sliding valve with pneumatic operated |
A)Cement Weighting Bunker
Weighting Capacityi: Load Cell: Pnömatik Klape: Vibrator:
| 1500 kg 3 unit 500 kg,ESİT Italy- MIX - Ø 250 mm 1 unit,Pneumatic Vibrators |
B) Water Weighting Bunker
Weighting Capacity: Load Cell: Pneumatic Valve:
| 750 kg 1 unitt-1000 kg ,ESİT Italy- MIX - Ø 150 mm |
C) Additive Bunker
Capacity: Load cell: Pneumatic Valve
| 30 kg 1 unit 100 kg ,ESİT 1 unit |
|
4.CONCRETE MIXER |
Origin Type Drive Type Concrete Capacity Mixing Arms Type Traverse Speed Motor-reductor power: Side Body Inner Linings Main Body Inner Linings The Mixing and Scraping Arms Lining | MESAŞ,TURKEY MBS-120 Dual - side Driven ( SİNGLE- SHAFT) 3 m3 SPIRAL 18 d/dk 2 x 55 kw, GAMAK-YILMAZ Hardox 400 16-18 Couple chorome Manganese Cast-15 mm 16-18 Couple chorome Manganese Cast |
Not: Our mixers can continue concrete manufacturing at half capacity in case of any motor or gear defection due to dual-side driven design. |
|
5. CEMENT SILO |
Capacity: Plate Thickness: Filling Pipe: Discharged Valve: Fluidisation jet: Hardware: | 2x75 Ton/unit 4-6 mm 4 inch Italy- MIX -Ø 300 mm 3 unit air jets Ladder, manhole, platform and parapets are included.. |
|
6. CEMENT SPIRAL |
Dimensions: Capacity: Motor-Reductor : | 2xQ273x6000 mm 90 Ton/hour 2x7.5 Kw GAMAK-YILMAZ |
7. COMPRESSOR |
Compressor: Discharge: Motor Power: Depot Volume: Pressure: | AYDINLAR Comp 1800 Lt/Dk 5,5 Kw / 7,5 Hp 550 Lt 8 Atü |
8. HYDROPHORE |
Hydrophore: Type: Motor Power: İnput - Output: Piping installation on the plant: | DOMAK Hird. KPDR 50 A - 2K 7,5 Kw 3'' - 2,5 '' 2,5" Pneumatic Valve |
9.CONTROL CABINET |
Trade Mark: Dimensions: Air Condtioner: Outer Wall: Inner Wall: Isolated sidewall: Isolated roof: Windows: | SIPKON container 2,2 x 2,6 m Arçelik - 7000 Btu/h 0,5 mm painted galvanized material 12 mm laminated chipboard 50 mm polyester hard blister 80 mm Glass woll PVC and ISICAM |
NOT: Electrical installation is imbedded. Fittings, socket and switches are exist in the cabin. |
|
10.PLANT AUTOMATION SYSTEM ( ALFER AUTOMATION) |
- Plant automation runs both from touch screen on control panel and monitor on computer.
- Manual or automatic operation can be done using lighted mini diagram.
- Amperage and voltage values can be monitored from digital indicators on panel.
- Control panel is manufactured durable to hard working conditions and any electrical precautions can be taken.
- Operator can adjust any parameter, make formulation and calibration and also receive manufacturing information using
- All electrical parts on control panel are genuine SIEMENS.
- PC, printer and UPS are included in system.
- Any number of formulation can be prepared and client and vehicle can be entered.
- Remote maintenance and partial administration can be done over Internet.
|
|